Checklists in TG App

The TG Tracking App supports conducting ‘pre-start checks’ which are a key compliance requirement in many industries and for many organisations. The app and TG system can be used to easily collect and store checklist data – replacing paper checklists. This saves effort and resources in collecting and filing paper checklists – a huge task for many businesses!

If you have not used the checklist functionality before, please contact support to have it enabled for your account.

Requirements:

 1. Download the App

Available on Android or iOs

  • Android – Play Store Download – checklists require 1.9.3 and above
  • iOS – App Store Download – checklists require 1.9.3 and above

2. Enable Checklists for your Organisation (or a customers organisation)

In order to assign these permissions, your account must have access. If you cannot see any of these options, contact support to have Checklists enabled for your account.
To enable checklists for any organisation:

2.1 Add the Checklist Functionality to the organisation

Admin >> Organisation Manage >> Organisations.
Select your org and add the checklist functionality. 

Add the Checklist Functionality to the organisation

2.2 Add any required checklist reports to the organisation

Switch to the Reports tab on the Edit Organisation dialogue and add the Checklist reports. These reports need to be added to the organisation before they can be assigned to users within that organisation. 

Add any required checklist reports to the organisation

3. Enable Checklists for any required user accounts.

Permissions for checklists are below – hover over any for a description.

Enable Checklists for any required user accounts.

Most staff completing checklists will need the Complete Checklists and View Checklists permissions.

Managers needing to review the answers and create checklists generally need all Checklist permissions.

Additionally, add the relevant checklist reports to the user account on the Reports tab.

About Checklists

Checklist Questions

Checklists comprise of a series of different questions presented to the app user. Question types are (with examples):
  • Yes/No
    Are you fit for work? Yes/No
  • Number (input a number as the answer)
    What is the odo reading of the vehicle?
  • Text (Input up to 200 characters)
    Describe any damage you see
  • Photo – take a picture of something
    Take a picture of a run sheet or take a picture of some damage
  • Select from a list of options
    What type of job are you doing?
  • Informational (no question – just if you want to display some instructions/info as part of the process)

Severity Levels

There are ‘severity’ levels based on answers.

  • Attention
  • Severe
  • Critical

The severity level is used to flag certain answers – either for later review, or to provide immediate notifications to managers.

The Attention and Severe levels serve to categorise different answers – i.e. the tyres might need attention, or there is a severe issue.

If a question is answered with Critical severity – the checklist will immediately be stopped, and the users shown the Critical Message (i.e. stop and contact your supervisor immediately). In the context of a pre-start check, a critical answer is something that if answered in this way means we should immediately stop work and resolve the issue. e.g. “Are you wearing your seatbelt?” = No, when operating a vehicle means we should stop there and then.

Reviewing Checklists

Checklists may be reviewed by managers in the Telematics Guru Interface. 

Offline Capability

There are scenarios where a user might need to complete a checklist while outside of mobile coverage. So this is catered for. No special setup is required, the device will handle this on its own as you go in/out of coverage. To summarise:

  • Requires Network Connectivity
       Downloading the app
       Downloading checklists to the device and storing them
       Changes to checklists & questions
       Uploading completed checklists
  • Can be done offline   
       Completing checklists

So when a user logs in, all checklist for which they are allocated are downloaded to the device. Should they go out of coverage, they will still be able to complete these checklists, and the data is stored on the mobile device. When they return to coverage the data will be uploaded, and synced up.

If while out of coverage, a manager changes the checklist questions, this change will not make it through to the user and they will continue filling out the ‘old’ checklist until they return to coverage.

Creating a Checklist

To create a checklist, select Checklists -> Manage Checklists, then Create New Checklist

Creating a Checklist

You will be asked to fill in the following:

Create New Checklist
  • Name: Give the checklist a name
  • Require Asset/Project Selection – e.g. the checklist might apply to an excavator, before it is used. If we don’t have projects enabled for the organisation the project option won’t be available.
  • Active – Checklists can be marked inactive when no longer used.
  • Critical Message – this message is shown to the user if they answer any questions with a “Critical” answer. For example “Are there powerlines overhead?” = Yes – may mean we want to have the user stop immediately.

    Once the details are entered we can hit Save & Configure to start configuring the questions.

Question Set Up

We can click the Add Question button to add a question. 

Checklists Question Set Up
  1. Type – Select from the question types described earlier
  2. Question Text – this is what the actual question is e.g. “Are you fit for work?”
  3. Active – We can uncheck this to remove/’delete’ and unused question
  4. Configuration – Further question configuration – which is specific to the type, continued below.

Yes/No Configuration

Yes/No Configuration
  1. Severity
    i.e. in the above, if the question is answered “Yes” – it will be flagged as severe – and potentially trigger notifications if we set this up.
  2. Skip Ahead
    This gives us the option to skip following questions. For example, a question might be – “Do you have any passengers?” – Y/N – if we answer Yes, we continue to the next question that might be “How many?” or “What are their names?”. But if we answer No – we can skip these.
  3. Allow N/A
    Whether N/A is a valid answer – severity and skips apply as before if enabled.

Number Configuration

Number Configuration

This allows us to set ranges. Hover over the information icon for more detail

  • Acceptable Range
    Range of values that will be accepted.
  • Attention, Severe, Critical
    We can set ranges of values that flag as Attention, Severe, or Critical. To set ‘above 100’ for example, we can just put 100 in the “From” column, and leave “To” blank. If there is any overlap, the highest severity will be logged.

    The Advanced tab allows us to add a ‘tag’ to the answer for advanced functionality.

Photo Configuration

Set the severity if a photo is taken, the size (standard or large) and if N/A is allowed to skip the photo. 

Photo Configuration

Selection List Configuration

Selection List Configuration

Here we can add different drop-down selections, plus assign a severity and skip ahead value to each one. 

Text Configuration

Assign a severity if we enter an answer and whether N/A is allowed.

Text Configuration

Assigning Users

Once the checklist is complete – we can assign the users that should be able to fill out the checklist on the Users Tab. 

Simply check the users that need to be able to complete this checklist – it will appear for them when they log into the app in their list of checklists. 

On the Notifications Tab – we can assign users to receive notifications if a checklist is completed and one of the answers has the relevant severity

Assigning Users

Editing Checklists and Questions

Caution should be used when editing checklists. Editing has been catered for to allow some edits to be made when first setting up a checklist – since it is likely some small errors will be corrected or the checklist tweaked slightly. However substantial edits, after a large amount of checklist data has been collected may lead to confusing results. For example if we edit a question and change the question text – all old answers given against the original text might be completely incorrect!

In general remember:

  • To ‘delete’ a question, we should mark it as inactive and drag it to the bottom of the list
  • Take care in re-ordering questions, as any skips will be affected
  • When making dramatic edits, it is often better to simply create a new list, and deactivate the old one

Copying Checklists

Checklists can be copied within an individual organisation, or to another organisation. This simplifies repeating set-up steps when multiple similar checklists may be set up.

To copy a checklist:

  1. Go to Checklist -> Manage Checklist
  2. With the gear icon (settings) – select to copy the checklist. Copy Here copies the checklist to the current organisation. Copy to organisation copies to another organisation. The list of organisations shown is just the list the user has access to.
Copying Checklists

When copying within the same organisation, you are presented with this dialogue:

Copy Checklist
  • Include Asset Type will copy across the ‘require asset selection’ setting.
require asset selection
  • Include question tags copies any question tags configured
  • Include inactive copies deactivated questions as well, if there are any

When copying to another organisation, you get the same options. How it works is slightly different.
If you select Include Asset Type, or Include Question Tags the asset type or tags will be created if they don’t already exist in the new organisation.

What it looks like - an example

Tips/Troubleshooting

Checklists/Changes not displaying

To ensure the best app performance, not all app data is retrieved every app load. Some data (e.g. the organisation list, and list of checklists) are only retrieved when the user logs in, switches organisation, or launches the app. As this data usually changes very rarely – loading them every single time only servers to use lots of mobile data, and slow everything down!

However the result of this might mean that while testing it may seem that your changes made on the website aren’t propagating through to the app as you make them.

To solve, resync this data using the Re-Sync Organisation Data button on the settings tab of the app.

Changes not displaying

Viewing Completed Checklists

Viewing Checklists

Navigating to Checklists → View Answers displays the following checklist screen:

Viewing Checklists

We have a few filters and options to change the view:

  1. Select the date
  2. Select the date range, 1 day, 7 days, or 1 month worth of checklists. Range starts from the date selected in (1)
  3. Select the checklist
  4. Shows/hides the filters in the blue rectangle.
  5. View all, or just ‘unresolved’ checklists
  6. This icon flags the checklist has a severity (Attention, Severe, or Critical) The checklist’s severity is the highest severity of all answers given. 

Resolving Checklists

Clicking on the blue ‘Completed At’ date allows us to view and resolve any issue raised via a checklist.
To ‘resolve’ the checklist in TG – we simply add a comment and click save and resolve.
Any other actions – scheduling maintenance, calling staff, booking repairs etc – must be handled outside of this 

Resolving Checklists

Checklist Reports

We have four (4) Checklist reports.

  1. Answer Summary Report – This is simply a list of all checklists, their severity, along with who resolved them and the comment. Great for tracking the number of issues being raised, and for compliance.
  2. Answer Detail Report – This is simply all checklist answers for a certain checklist in a grid – so that we can view all answers at once.

  3. Photo Report – a way to download all images taken for checklists. We may be using the photos for storing images of receipts, delivery dockets, manifests etc. So this is how we access these records.

  4. Partner Billing User Report – Shows all users with checklist permissions enabled that are billed for.
Was this article helpful?
YesNo
Scroll to Top